Wave Weapon Boards - Boards we currently have in stock

BOARDS WE CURRENTLY
HAVE IN STOCK

(Like these 2 Hobie {Phil Edwards} models

	Ultimate Nose Rider
	- 10.0 x 23 x 3 3/8
	- 18 1/2 Nose + 14 1/8 Tail
	- 1/4 material inlay
	- Full spoon and double barrel concave
	Custom Boards available in this size & shape

	Nose Rider
	- 9.8 x 23 x 3 3/8
	- 18 1/2 Nose + 14 1/8 Tail
	- 2 side fins & 1 10" box
	- Contains two material panels on deck


	Nose Rider
	- 9.1 x 22 x 3
	- 18 1/2 Nose + 14 1/8 Tail
	- Single fin & 1 10" box
	- Contains one 18" material panel


	Nose Rider
	- 9.0 x 21 1/2 x 2 7/8
	- 18 Nose + 13 1/2 Tail
	- Custom airbrushed dolphins on the deck
	- Contains two material panels on deck

	Epoxy Nose Rider
	- 9.6 x 22 x 3 5/8
	- 19 Nose + 14 Tail
	- Plain white board
	- Board includes a step deck & spooned nose

	Epoxy Nose Rider
	- 9.6 x 22 x 2 7/8
	- 19 Nose
	- Step deck with full spoon
	- This board has np material in lay

	Speed Egg
	- 7.6 x 22 x 2 7/8
	- 15 1/2 Nose + 14 1/8 Tail
	- Double barrel concaves, thruster
	- 1/4 material inlay on deck

	Hybrid Short Board
	- 6.10 x 20 x 2 3/8
	- 12 Nose + 13 1/3 Tail
	- Deep barrel channels, razor sharp tail rails
	- Contains two multi-color airbrushed panels on deck

We at Wave Weapons could spend hours on surfboard specs, just like most companies and their web sites do to intrigue the purchaser. The fact is, we will build you the board you have put together in your own mind, the one that you feel will improve your surfing. After all, who understands your surfing better than you do?
Take advantage of our FREE Consultation and Customer Service by giving us a call, especially if you're not sure of what it is you want, and we will walk you through the fundamentals. Like a high performance race car a lot goes into building a board and we have broken it down into categories to help you design the best board for you! Choose a Shape & Size then move on to the following:
DECK	BOTTOM	NOSE	TAIL	GRAPHICS/COLORS	GLASSING	FINISH	PRICING

SHAPES & SIZES

All of our shapes are designed to give each individual the peak performance out of themselves and our boards. Whether you are 100 pounds - 300 pounds we can shape a board with a single or double barrel contours, with reverse "V" for that lift off, air attack or for that down the line speed you need in fast shore break situations.

F-4 Phantom #1

This shape was designed with a flat deck and hard sharp edge rails around the tail. The Dual Barrel "V" provides quickness on either back or front side carving.

ACTION		Air Acrobatics and/or hard carving
SURF SIZE		Small to over head waves
SURFER SIZE		40 - 160 pounds (suggested)
BOARD SIZE		5' - 6' 3"

F-4 Phantom #2

This shape is exactly like the F-4 Phantom #1 except it is designed for the larger/bigger surfer who also enjoys fast action and is aggressive also.

ACTION		Air Acrobatics and/or hard carving
SURF SIZE		Small to over head waves
SURFER SIZE*		161 pounds + (suggested)
SURFER SIZE*		*Depends on size of surfer!
BOARD SIZE		6' 4" - 6' 10'

Migg Fighter (Fish)

This shape is derived from the old action of the twin fin fish. The rail to rail action is very responsive for those quick sandbars and reefs.

ACTION	More of a skateboard effect and feel
SURF SIZE	Small to over head waves (for best results)
SURFER SIZE	Up to 230 pounds
BOARD SIZE*	5' 2" - 7' 2"
BOARD SIZE*	*Board size changes depending upon surfer size

Stealth (Egg Shape)

This shape is designed for the surfer who enjoys an all over aspect of different types of surf without losing the paddling power and floatation needed. This shape is also very stable thus making it easier to learn and get into the sport.

ACTION	Semi soul surfing/good beginner board
SURF SIZE	Small to over head waves (for best results)
SURFER SIZE	170 - 250 pounds
BOARD SIZE	6' 6" - 7' 6"

F-15 Mini Gun

This shape was created for those big days. This design

ACTION	Bigger barrels and long hard carves
SURF SIZE	Mid to larger waves
SURFER SIZE	160 - 240 pounds
BOARD SIZE	7' 6" - 8' 4"

The Big Gun #2

This shape is exactly like the F-4 Phantom #1 except it is designed for the larger/bigger surfer who also enjoys fast action and is aggressive also.

ACTION	Biggest waves and biggest barrels
SURF SIZE	15' waves +
SURFER SIZE	180 - 280 pounds
BOARD SIZE	8' 6" - 9' 6"

B29 Mini Nose Rider

This shape is exactly like the F-4 Phantom #1 except it is designed for the larger/bigger surfer who also enjoys fast action and is aggressive also.

ACTION	Casual surfing for the lighter surfer
SURF SIZE	1 - 4 foot waves
SURFER SIZE	Up to 180 pounds
BOARD SIZE	7' 10" - 8' 6"

9/9 Nose Rider

This shape is exactly like the F-4 Phantom #1 except it is designed for the larger/bigger surfer who also enjoys fast action and is aggressive also.

ACTION	Casual surfing for the bigger surfer
SURF SIZE	1 - 6 foot waves
SURFER SIZE	181 + pounds
BOARD SIZE	8' 8" - 9' 9"

DECK
	In the "Old Days" a Rounded Deck was common for most board shapes for it helped with the outlook of water and run off and helped riders get better foot grip.
	For the past five to seven years Flat Decks have been more desired because they have more displacement area for the least amount of touch to control. In other words, when "Catching Air" it gives the rider more room to use on landing.

BOTTOM
We offer four different Bottom Designs for you to choose from depending on your desires:
Double Channels
Drag has been the downfall to all small shaped, aerial tactic surfboards. Many surfers are able to detect the small small changes in numerous styles of channels or tail shapes to suit their needs at certain breaks. Due to the steepness of the face in certain breaks, channels can help in positioning, yet would not be very useful in slow mushy break.
Hollow Channels
These channels help in fast beach breaks or in reef if the surfer enjoys grabbing air or doing tricks.
V
This design helps a lot in rail to rail type of surfing or on big 10' guns or longboards and especially if you have a pin tail.
Flat Bottom
If you are surfing in slow mushy break the Flat Bottom would be the best design for you because the water flows fastest over a smooth flat surface.

NOSE

We offer three different Nose Designs for you to choose from depending on your desires:

Pulled In

	12" and under
	More maneuverable
	More speed
	Light weight
	For the more advanced surfer

Egg Shape

	16" and under
	Slow
	Good for learning on
	For the beginner to intermediate surfer

Nose Riding

	16" and up
	8 foot board and longer
	Good for small waves
	Handles heavier loads

TAIL SHAPES
We offer nine different Tail Shapes for you to choose from depending on your desires:
Pin Tail
Drag has been the downfall to all small shaped, aerial tactic surfboards. Many surfers are able to detect the small small changes in numerous styles of channels or tail shapes to suit their needs at certain breaks. Due to the steepness of the face in certain breaks, channels can help in positioning, yet would not be very useful in slow mushy break.
Rounded Pin
These channels help in fast beach breaks or in reef if the surfer enjoys grabbing air or doing tricks.
Diamond Tail
This design helps a lot in rail to rail type of surfing or on big 10' guns or longboards and especially if you have a pin tail.
Squash Tail
If you are surfing in slow mushy break the Squash Tail will display a different attitude in the water. This is similar to a scooting affect.
Rounded
Drag has been the downfall to all small shaped, aerial tactic surfboards. Many surfers are able to detect the small small changes in numerous styles of channels or tail shapes to suit their needs at certain breaks. Due to the steepness of the face in certain breaks, channels can help in positioning, yet would not be very useful in slow mushy break.
Swallow Tail
These channels help in fast beach breaks or in reef if the surfer enjoys grabbing air or doing tricks.
1/2 Moon Tail
This design helps a lot in rail to rail type of surfing or on big 10' guns or longboards and especially if you have a pin tail.
Single Wing Pin Tail
This design will help the surfer that requires more speed in his surfing while still having plenty of maneuverability.
Double Wing Pin Tail
This design; even more so than the Single Wing Pin Tail, will help the surfer that requires more speed in his surfing while still having plenty of maneuverability.
*Note - The differences in Tail Shapes are not mandatory per size or shape of surfboard.**

FINS
We offer eight different Fin Designs for you to choose from depending on your desires:
3 FCS (Future C System)
This is a newer plug system has 3 removable fins. This design is very strong and very, very light weight.
3 Future
This box system is strong and is very common in the industry so finding three replacement fins will be easy.
3 Glass On
This find design is extremely light, very strong and maneuverable for it is a permanent system. Keep in mind if it is damaged it will alter the performance. It is usually repairable if you damage a fin and we offer Services for repairs.
Glass on Lite
This design is the same as the 3 Glass On except the glass layer is applied lighter.
2F + 1 Box
This design is for longboards and is the same as the 3 Future plus it has 1 Big Box System which can be either a 10" Box (for Larger Boards) or a 8" Box ( Smaller Boards).
2 FCS + 1
This design is for longboards and is the same as the FCS System plus it has 1 Big Box System which can be either a 10" Box (for Larger Boards) or a 8" Box ( Smaller Boards).

GRAPHICS/COLORS

We offer various graphics and colors for you to choose from depending on your desires:

Colors

Unlike print business we don't charge by the number of colors used we charge by the time taken to complete the graphics. This means the larger the graphic size on your board takes more time to create, thus costs more to produce.

Techniques

We use the common techniques like fading, feathering and shadowing to create outstanding, artful images on our boards. While doing this we have even invented a few that will make your board have a different look than anyone in the ocean. Again we do these by hand.

Murals

These graphics look like pieces of art hanging in museums and some customers have requested famous pieces and we can do full, 3/4, 1/2, 1/4, or 1/8 murals if you would like.

GLASSING

We offer different Glass layering for both the bottom and top of your board:

Bottom

1 layer of glass is applied with the thickness of your choice

	4 oz./ 5oz. / 6oz.
	Fin Patch (Request Only) - After layer is done another is applied to strengthen the fin area

Top

2 layers of glass is applied one right after the other.
The first layer consists of - 1 layer of patch cloth is applied for strength

	3/4 (Patch) + 4 oz. (Glass)
	4 (Patch) + 4 oz. (Glass)
	5 (Patch) + 4 oz. (Glass)
	6 (Patch) + 4 oz. (Glass)
	6 (Patch) + 6 oz. (Glass)
	Tail Patch (Request Only) - After layer is done another is applied to strengthen the tail area

FINISH

We offer two different finishes for your board:

Gloss & Polish	Sand Only
This is our most popular for it is a clear, shiny, transparent finish which is strong and seals in.	This finish has a flat look that is lighter and faster thus more maneuverability. For the more advanced surfer that knows this is not as durable as the gloss & polish finish.

PRICING

The price for a Wave Weapon Board depends on your board size as shown below:

We have tried to explain the surfboard specs. to you without confusing the newcomer and please keep in mind that these dimensions can change depending on the request...

Top of Page